helvede.net is one of the many independent Mastodon servers you can use to participate in the fediverse.
Velkommen til Helvede, fediversets hotteste instance! Vi er en queerfeministisk server, der shitposter i den 9. cirkel. Welcome to Hell, We’re a DK-based queerfeminist server. Read our server rules!

Server stats:

171
active users

#wireless

0 posts0 participants0 posts today
Replied in thread

@teledyn @sebastian@mastodon.cc

The #whitehouse explanation for why they need #Starlink should be included in #teaching materials in #computer #networks, #infrastructure, #wifi -

as an example for how things DO NOT work,
and what DOES NOT make any sense.

Except of course the #design goal is something else than what you are communicating altogether.

#bullshit #gaslighting

LOL

"#WhiteHouse said the installation was an effort to increase internet availability at the complex. They said that some areas of the property could not get cell service and that the existing Wi-Fi infrastructure was overtaxed.

... the effort was “to improve #WiFi connectivity on the complex.”

It is less clear, however, that the #Starlink internet service will significantly expand #wireless internet capacity in buildings where fiber cables already provide access."

nytimes.com/2025/03/17/us/poli

Questions about the business interests of Elon Musk conflicting with his status as a presidential adviser and major Trump donor have persisted for weeks.
The New York Times · Elon Musk’s Starlink Expands Across White House ComplexBy Maggie Haberman

New goal: I plan to meet at least two new people in the Greater Seattle Area every month. This can be for a meal, or just for coffee. I did this twice in January, and made two new friends. If you live around here and work in information technology, cybersecurity, operational technology, or telecommunications, I’d love to meet you and swap stories and ideas.

It can be one-to-one, or a group meeting. I had a great time on my last trip to Georgia meeting with a group of IT people at Outback. Each one of us works for a different company, but we had plenty in common to have a lively discussion over dinner.

So, I might as well continue this practice on my home turf!

If you’d like to do this, you can reach me through a LinkedIn DM, the “Contact Us” page on the FIFO Networks website, or just look in the “About” section of my LI profile. My mobile number is in there.

#CallMeIfYouNeedMe #FIFONetworks

For a long time, I used three access points at home. A few months ago, I decided to downsize and see if, with technological advances, I could reduce the number of APs. Obviously, the more remote areas would be penalized, but at the moment I don't need a lot of bandwidth, just stability. So I kept only the Omada 670 - hung from the ceiling, roughly in the center of the house. The coverage was fairly complete, except for a few unimportant corners. It was ok-ish.

I had the opportunity to get a Ruckus R550 at an interesting price (for a Ruckus, of course) and, despite having lower speed performance than the Omada, I wanted to try it. Initially I was disappointed. The coverage was almost the same (but the Ruckus is in a slightly worse position, about a meter from the Omada but resting on a wooden piece of furniture), so I didn't see the advantages. However, I left it running, since I had it. The network remained stable for months.

A few days ago I needed the poe injector I use for the Ruckus (while the Omada is powered by its own power supply) so I reconnected the Omada and turned off the Ruckus. Same channels, same configuration.

Suddenly, I realized the difference. Even seeing (almost) the same signal levels from the monitoring apps, the actual performance is very different. Even in a distant room with many walls (of brick and concrete) in between, the 5Ghz signal of the Ruckus remains stable and reliable, while with the Omada it was much less stable. As "bars", almost the same. But with the Omada it is a continuous packet loss and switching to 2.4 GHz. Moreover, the most distant device (a Raspberry PI A+ with FreeBSD) with the Omada loses signal several times a day, with the Ruckus no problem and despite having a minimum bandwidth, it does not lose packets.

Going back to the Omada for a few days showed me that yes, there are differences. Yesterday I reconnected the Ruckus. Gone, again, all the problems. Of course, with the cost of a Ruckus (on offer) I get 3 "superior" Omadas, but the difference is there.

#WiFI#Omada#Ruckus

I'm so proud! #Sennheiser never would have allowed a #garage-built #proton-pack to make it in to their behind-the-scenes video! (That's me starting at 2:36)

youtube.com/watch?v=tZZmv2LQ-Es

For contrast, don't miss the Sennheiser #Spectera video.

youtube.com/watch?v=Qvi36Lq4eHc

#Shure #IEM #wireless #electronics #telemetry

I'm doing the next generation protonpack #fpga telemetry system as an #opensource #openhardware design.

Team #mastodon will help me out, right?

github.com/poleguy/protonpack/

Replied in thread

@lproven

「… alternatively, the FreeBSD project gets a subproject going which brings in the WiFi drivers from OpenBSD twice a year or something.」

Smart thinking. +100 to reuse of code, collaboration, and the like.

You're not the first person to ask about OpenBSD. The brief answer, from <wiki.freebsd.org/WiFi/Iwlwifi#>:

「There were other people looking into this.

When I started there was limited support for various chipsets already supported by iwlwifi, … mangled so that comparing to the original code was no longer possible in an automated way … goals listed above … another driver to change and support (in addition to iwm).」

<old.reddit.com/r/freebsd/comme>

Cc @TomAoki @emaste @stefano @FreeBSDFoundation

wiki.freebsd.orgWiFi/Iwlwifi - FreeBSD Wiki

FreeBSD 14.2 release candidate

<lists.freebsd.org/archives/fre> thanks @cperciva

<old.reddit.com/r/freebsd/comme>

「The biggest change in 14.2-RC1 is that the installer images contain some wifi firmware, and the installer knows how to download and install firmware packages.

This is important for solving the chicken-and-egg problem of systems which need firmware packages in order to connect to the internet – it's hard to download and install firmware if you don't already have the firmware you need to connect to the internet.

If you have hardware which needs firmware to work, please test!」

lists.freebsd.orgFreeBSD 14.2-RC1 Now Available